Swashplate
about 73.5mm
about 27.5mm
50mm
Ball link-long(23mm)
Ball link-long(23mm)
M2.3*50L
M2.3*50L
Swashplate link orientation
Left
Right
Ø3 Allen head
Swashplate
Spacer
Ø3xØ5x3.37
M3-18 SS
M3 Nylon nut
M4-5
Bind screw
M4-5
Bind screw
M3-15
Cap screw
M3-15
Cap screw
Ø3 Allen head
20
Insert the allen head into the hole as shown in the diagram ,
make sure the rocker-arm is parallel with the swashplate.
Ball link
T-016-01
T-020-01
T-011-02
Rotor Head Complete Assembly
22
Please apply loctite when
locking all metal screws .
Lo
ck
M4-5 Bind screw
2
1
1
M3-18 SS
M3 Nylon nut
1
2
M3-15 Cap screw
Spacer Ø3xØ5x3.37
Ø3 Allen head
Adjust the position of ARE support,
make sure ARE support is in the
vertical position by letting its fillet
corner contact with the allen head.
Ø3 Allen head
Adjust the position of the
ball link,make it in touch
with the allen head ,ensure
the rod is in the vertical
position.