14
There are the following ways to start the
recording:
by “Rec-Stop” Switch (see position 14 at
Figure “Appearance” at p.3)
by Timer
by Control Signal (contact “remote” of
“VD” connector, see position 11 at Figure
“Appearance” at p.3, for base diagram see
Appendix )
by internal motion detector activation
by VAS system activation
Starting the Recording by “Rec-Stop” Switch
When installing master card or while quitting
standby mode the master card inserted into the
connector (position 16) is being scanned. After
that the Recorder is ready to start operating. When
shifting “Rec-Stop” switch to “Rec” position the
recording starts. The data will be recorded onto the
card marked by a frame on the indicator.
To stop recording shift switch to “Stop” position.
Starting the Recording by Timer
The Recorder has 10 timers. Set the parameters
and turn on the necessary timer using the
Recorder’s Menu (see Appendix 1) or “Manager”
•
•
•
•
•