13
Starting the Recording without Prehistory
There are 4 connectors for memory cards in the
Recorder. The Recorder reads service information
necessary for the Recorder’s operation from
memory card inserted into the slot (position 16).
This information is recorded onto the memory card
when preparing it in “Manager” program.
There also can be any memory card formatted
in FAT-3 format in other slots. When starting
the recording the data will be recorded onto the
memory card marked by a frame on the indicator
(see position 4 at Figure “Recorder’s Indicator” at
p.4). Frame indicator can be transferred from one
memory card onto the other by “Fn” button (see
position 4 at Figure “Appearance” at p.3). The
indicator is transferred through inserted memory
cards, not the slots themselves.
To start the recording make sure that there is
a master card (memory card with the recorded
service information) in the slot (see position 16)
(see Section “Working with memory cards”).
