1
Working with Memory Cards
Memory card with service files and file with
settings for the Recorder (for preparing this card
see “Preparing for work”) must be inserted into
the slot (position 16) (see Figure 1 “Appearance”
at p.3) marked on the case by a scaled-up icon
comparing to other slots for memory cards. Each
time memory card is inserted into the slot (Position
16) or the Recorder quits Standby Mode (when
powered from external power source the Recorder
doesn’t switch to Standby Mode) the Recorder
scans memory card.
If the Recorder’s parameters have been modified
new settings are recorded onto the memory card in
the slot (position 1).
It is recommended to mark the card to save service
file and Recorder’s setting parameters. The data
are recorded onto the card marked by an external
frame on the Recorder’s indicator (see position 5 at
Figure “Video Recorder’s Indicator” at p.4). LED
is on while recording onto the memory card.
The card mustn’t be extracted from the
slot during recording.
