8
9. Install Control box
(with finished wall)
Using Template on back of this instruction booklet, mark and cut wall opening. (Cutout size is 3
7/8 inches Wide X 4 1/8 inches High) Note that a portion of the wall box is hidden inside the wall
cavity, and that the box and wall plate can be mounted in any direction required.
When the box is installed after the wall is finished (enclosed) the mounting wings should be
broken off and discarded. The wall clamps engage the wall automatically as the screws are
tightened.
Insert control box into wall opening. Secure box to wall by tightening clamp screws. Route wire
groups appropriately: Low voltage wires from window/skylight through the notch found on the
control side of box.
Clamp
screws
Cut off
mounting
wings
Wall box
installed.
High
Voltage
Wires
Low
voltage
wires
