Trust Ami Mouse Wireless 200
4
3. Installing the batteries
The batteries must be installed before you can use the mouse. This is carried out as follows:
1. Push the button on the bottom of the mouse (see figure 1).
The battery flap comes loose.
Figure 1: Bottom of the mouse
2. Remove the battery flap from the top of the mouse by sliding it off of the mouse. The battery
compartment will be visible (figure 2).
Figure 2: Battery compartment
3. Insert the two AAA batteries provided into the battery compartment as shown by the diagram inside the
battery compartment.
4. Slide the battery flap back onto the mouse until a click is heard. The batteries have been successfully
installed.
Note:
Inserting the batteries incorrectly may cause damage to the mouse!
