742AV USB2.0 LCD POWER VIDEO
19
U K
Problem
Cause
Possible solution
The camera is still
connected to your
computer.
Disconnect the USB cable. The
camera cannot be operated when it
is connected to a computer.
The camera is turned
off.
Turn the camera on.
The batteries are
empty.
Replace the batteries.
The camera has shut
down automatically by
power save.
Turn the camera on again.
The camera
suddenly turns
itself off.
The battery power is
low.
Replace the batteries.
The camera was
moved.
Try to hold the camera still or use
the stand.
The macro setting is
still selected while the
distance to the object
is too far.
Rotate the Macro select dial to
normal-distance setting (see
chapter 10.4).
The distance to the
subject is too small.
Increase the distance to the object
to be photographed or select the
macro setting.
The recordings
are not clear
(hazy).
There is insufficient
light.
Improve the lighting.
There is no
connection with
the computer.
The camera has been
connected incorrectly.
Reconnect the cables
The camera does
not give an image
in the application
(webcam).
Another application is
open and is using the
camera image.
Close the other application first
before starting the program.
The background
lighting is not white.
Change the lighting. If this does not
help, use Photo Express to edit the
colour.
The monitor has not
been set correctly.
Compare the photograph to other
photographs (for example, on the
Internet) where you know the colour
is correct. Adjust your monitor
correctly (see the instruction manual
provided with your monitor).
The printer has been
set incorrectly.
If the photographs look good on
your monitor, check your printer
settings.
Photographs are
discoloured on
the monitor or
when printed.
An inkjet printer has a
blocked ink cartridge.
See the instruction manual provided
with your printer for instructions on
how to test the printer and solve any
problems.