TRUST 610 LCD POWERC@M ZOOM
22
Problem
Cause
Possible solution
Set your VGA card to a lower
resolution and colour depth (for
example, 800 x 600 / 16 bits
colours).
If a too high VGA
resolution is used (for
example, 1600 x
1200), it is possible
that there is
insufficient memory
for the video overlay.
Updating your VGA driver may also
solve the problem.
The white balance has
been incorrectly set on
the camera.
Set the white balance correctly
(see chapter 4.5.1).
The background
lighting is not white.
Alter the white balance (see
chapter 4.5.1). If this does not
help, use Photo Express to edit the
colour.
The monitor has not
been set correctly.
Compare the photograph to other
photographs (for example, on the
Internet) where you known the
colour is correct. Adjust your
monitor correctly (see the
instruction manual provided with
your monitor).
The printer has been
set incorrectly.
If the photographs look good on
your monitor, check your printer
settings.
An inkjet printer has a
blocked ink cartridge.
See the instruction manual
provided with your printer for
instructions on how to test the
printer and solve any problems.
The photographs
are coloured.
The paper used is
unsuitable for printing
photographs.
Use original paper from your printer
manufacturer for the most reliable
result.
The photographs are
taken in dark
surroundings.
Make sure there is sufficient light
or use the flash.
There is noise in
the photographs
or the
photographs are
too dark.
The flash has been
used, but the distance
is too great.
Use the flash up to a distance of 4
metres. The flash cannot be used
for greater distances.
The flash has been
used in bright daylight.
The flash is not suitable for
providing additional lighting. Do not
use it in daylight.
The contrast in the
subject is too great.
Change the lighting or take the
photograph closer by or further
away.
The photographs
are overexposed.
The photographs were
taken in bright
sunlight.
Take photographs in the shadow or
try to adjust the white balance (see
chapter 4.5.1).
No more
photographs can
be taken.
The camera’s memory
is full. The recording
counter in the LCD
screen flashes.
Download the photographs onto
your computer and then delete
them all from the camera’s
memory.
The problem is
not listed here.
Check the Internet for
the latest update of
Go to
www.trust.com/customercare/help/
