TRUST 610 LCD POWERC@M ZOOM
15
U K
6
Installing the application software
A number of different applications are supplied with the camera. These applications
do not have to be installed to use the camera. However, it is recommended to install
these programs in order to use all the extra options available with the camera.
Note:
Make sure all other applications are closed during the installation.
6.1 Photo
Express
Photo Express 4.0 is an application that can be used to load and edit the
photographs on your PC which you have taken using your TRUST 610 LCD
POWERC@M ZOOM. This program requires 500 MB free hard disk space. Follow
the instructions below to install Photo Express 4.0. This installation can take longer
than 10 minutes.
1.
Start the Trust Software Installer (see figure 9).
2.
Select ‘Photo Express’.
3.
Select the language you wish to use.
4.
Follow the on-screen instructions.
6.2 Photo
Explorer
Ulead Photo Explorer 7 is a program which you can use to organize your
photographs. Simple processes can be carried out, such as rotating, printing and
viewing the photographs. Photo Explorer is useful if you wish to download
photographs and save them on your computer. Follow the instructions below to
install Photo Explorer 7.0.
1.
Start the Trust Software Installer (see figure 9).
2.
Select ‘Photo Explorer’.
3.
Select the language you wish to use.
4.
Follow the on-screen instructions.
6.3 COOL
360
COOL 360 is an image editing program that can be used to change the photographs
you have taken using the TRUST 610 LCD POWERC@M ZOOM into panoramic
photographs. Follow the instructions below to install COOL 360.
1.
Start the Trust Software Installer (see figure 9).
2.
Select ‘Cool 360’.
3.
Follow the on-screen instructions.
6.4
DVD Picture Show
This program should only be installed if your computer has a CD-writer or a DVD-
writer. DVD Picture Show allows you to transform your photographs into a slideshow
which can easily be played using a DVD player. In order to enjoy maximum use of
this application, you require a CD-RW or DVD-writer and a DVD player. Not all DVD
players are able to read DVD’s or CD-R disks which you have made yourself. If in
doubt, see the instruction manual provided with your DVD player.
1.
Start the Trust Software Installer (see figure 9).
2.
Select ‘DVD Picture Show’.
3.
Select the language you wish to use.
4.
Follow the on-screen instructions.
