TRUST 240H EASY WEBSCAN GOLD
4
4.
Click on 'Next' to continue with the installation.
5.
Click on 'Yes’ to accept the license agreement and continue with the
installation
6.
During the installation, a window will be displayed in which you must fill in
some information, such as your name and your company name. Fill in this
information and click on ‘Next’ to continue with the installation.
Note
:
The installation will be stopped if you do not fill in a company
name. Always give a company name.
7.
If desired, specify a location to install Photo Express in and click on ‘Next’.
8.
If desired, specify another location for the program icons and click on 'Next'.
9.
Click on 'Next' again. Photo Express will now be installed in the specified
location.
10.
After the installation, click on ‘Finish’ to complete the installation process.
You have now completed the installation of Ulead Photo Express 4.0 SE. After the
installation, the Photo Express instruction manual can also be selected via the
Windows Start menu by clicking on ‘Start – Programs - Ulead Photo Express 4.0 SE
- Screenbook’.
Note:
Adobe Acrobat Reader must be installed on your computer in
order to read the Photo Express instruction manual. This
program is included on the Ulead CD-ROM and the Trust CD-
ROM. On the Trust CD-ROM, open the ‘Acrobat’ folder and
double-click on the ‘Setup.exe’ file.
Continue to the next chapter.
3.6
Connecting the 240H Easy Webscan Gold to your
computer
Note:
A USB device is ‘hot-swappable’. This means that the device
can be connected and disconnected from your computer whilst
your computer is turned on.
Note:
If you connect the scanner to a USB hub, then this hub must
have its own power supply. The USB outputs must also provided
a current of at least 500 mA.
Note:
During installation in Windows 2000, you may receive a
message saying that the driver has not been signed. This does
not cause a problem for the functionality.
Connect the scanner after the software has been installed.
1. Start
Windows.
2.
Connect one end of the USB cable to the scanner.
3.
Connect the other end of the USB cable to a free USB port on your
computer.
4.
New hardware will be detected and the scanner will be automatically
installed.
Note:
In Windows XP, select the option to manually search for the best
driver and specify the location as [D:\WinXP]. ‘D:\’ is used to
indicate your CD-ROM drive with the Trust CD-ROM containing
the drivers and applications.
Your scanner is now ready for use.
