TRUST 960 POWERC@M CCD
U K
Problem Cause
Possible
solution
The camera was
moved when taking a
picture.
Try to hold the camera still or use
the stand.
The distance to the
subject is too small.
Increase the distance or use the
macro setting.
There is insufficient
light.
Improve the lighting.
The recordings are
not clear (hazy).
The macro switch is
set to the wrong
setting.
Set the macro switch to the correct
setting.
The automatic
exposure function is
still turned on.
Turn the automatic exposure
function off.
The memory is full.
Transfer photographs to your
computer and delete the contents
of the memory.
You can take many more
photographs using an SD or MMC
card. Ask your dealer.
No photograph is
taken when the
exposure button is
pressed.
The camera is still
busy saving the
previous photograph.
Wait until the photograph has
been saved in the memory.
The white balance has
been incorrectly set on
the camera.
Set the white balance correctly
(see chapter 10.5.4).
The background
lighting is not white.
Try to adjust the white balance
(see chapter 10.5.4).
The monitor has not
been set correctly.
Compare the photograph to other
photographs (for example, on the
Internet) where you known the
colour is correct.
Adjust your monitor correctly (see
the instruction manual provided
with your monitor).
The printer has been
set incorrectly.
If the photographs look good on
your monitor, check your printer
settings.
An inkjet printer has a
blocked ink cartridge.
See the instruction manual
provided with your printer for
instructions on how to test the
printer and solve any problems.
The colours of the
photograph are
incorrect.
The paper used is
unsuitable for printing
photographs.
Use original paper from your
printer manufacturer for the most
reliable result.
The photographs are
taken in dark
surroundings.
Make sure there is sufficient light
or use the flash.
There is noise in
the photographs
or the
photographs are
too dark.
The flash has been
used, but the distance
is too great.
Use the flash up to a distance of 3
metres. The flash cannot be used
for greater distances.
27
