C
7
About the Rotary-tool
Start Up
Before using the Rotary-tool please learn about all its application possibilities.
Rotary-tool is a high-speed, efficient, versatile and easy to handle manual tool.
It is designed to polish, cut, grind, strip, sand, bore, make holes, brush, clean, etc.
It has a small but powerful motor, equipped with a speed selector allowing to operate from 10000 RPM up to 36000 RPM.
With a comfortable in the hand design accepts a large variety of accessories including high speed abrasive cutting discs,
silicon carbide grinding stones, tungsten carbide cutters, high-speed wire discs, polishing tips, embossing and cutting tips,
sanding discs, drill bits and other accessories.
These accessories have different sizes and shapes allowing a large scope of jobs.
As you adapt to the jobs and the large variety of accessories you will enjoy the Rotary-tool versatility.
• Un-plug the Rotary-tool.
1.
Insert a collet (
A
) of the desired gauge for the axis
accessory into the Rotary-tool axis (
B
).
2.
Depress the shaft lock (
C
) while threading but not
tightening the collet nut (
D
).
3.
Insert he accessory (
E
) you need into the collet. Never
try to force entry of the accessory. Better, change the collet
and use a larger caliber.
4.
Pressing the shaft lock use a collet wrench to tighten the
collet nut and have the collet securing the accessory. Verify
the accessory is not loose in the tightened collet. In which
case, change it for a lower caliber.
• To remove the accessory, press the shaft lock while
loosening the collet nut.
• Do not press the shaft lock while the
tool is running.
Installing accessories
A
D
E
B
1
2
3
4
WARNING
ENGLISH
