Trumpf TruTool N 700, Руководство оператора

Страница: 6 / 26

2. Description
1 Bow-handle (mountable in 2
positions)
2 Eccentric shaft
3 Punch guide
4 Punch
5 Die
6 Chip ejector
7 Die carrier
8 Locking mechanism for die car-
rier
9 Clamping lever for fastening the
handle
10 On/off switch
11 Release inhibiter knob
Nibbler TruTool N 700 Fig. 38379
2.1 Intended use
The TRUMPF Nibbler TruTool N 700 is an electrically operated
hand-held device for:
■ Cutting of plate-shaped workpieces made of a punchable
material such as steel, aluminum, nonferrous heavy metal
and plastic.
■ Cutting of tubes and machining of edged sheet profiles and/
or press brake bendings e.g. for tanks, crash barriers,
troughs etc.
■
Nibbling of straight or curved exterior and interior cutouts.
■ Nibbling along scribed lines or templates.
6 Description 2011-04 E528EN_06
deskPDF Studio Trial