Trumpf TruTool N 700, Руководство оператора

Страница: 15 / 26

4. Operation
4.1 Working with the TruTool N 700
Damage to the machine due to improper handling.
Ø Make sure the machine is always in a stable position when
operating it.
Ø Never touch the tool while the machine is running.
Ø Always operate the machine away from your body.
Ø Do not operate the machine above your head.
Damage to property due to excessively high line voltage
Motor damage
Ø Check the line voltage. The power supply voltage must cor-
respond to the information on the nameplate of the machine.
Ø When using an extension cord that is longer than 5 m, the
cord must have a line diameter of at least 2.5 mm².
The cutting result is improved and the service life of the punch
increased if the cutting track is coated with oil before machining
the workpiece.
Material Oil
Steel Punching and nibbling oil, order
no. 103387
Aluminum Wisura oil, order no. 125874
Recommendations for oil Tab. 6
1 Release inhibiter knob 2 On/off switch
Fig. 38380
1. Put machine in position in front of the tool.
2. Either
Ø To switch the machine to continuous operation:
E528EN_06 2011-04 Operation 15
WARNING
CAUTION
Positioning machine
Switching on
deskPDF Studio Trial