Trumpf TruTool N 700, Руководство оператора

Страница: 13 / 26

3. Rotate the die carrier (2) by 360° as often as needed until
the punch penetration depth of 1-3 mm has been achieved.
4. Close the locking mechanism (4).
3.4 Selecting and attaching a handle
The suitable handle can be chosen depending on the application.
Two types of handle are available:
■ Bow-handle
■ Compact handle
1 Bow-handle
2 Motor handle
3 Clamping lever
Bow-handle TruTool N 700 Fig. 54785
The bow-handle provides optimum handle positioning at all work-
ing heights. In combination with the motor handle, the weight of
the machine is distributed over both handles.
1 Compact handle
2 Motor handle
3 Clamping lever
Compact handle TruTool N 700 Fig. 54786
The compact handle is developed for application in situations
where space is limited (e.g. profile machining). Moreover it is
made out of steel and is heat resistant.
1. Attach the handle to the machine without a tool, using the
clamping lever (3) for assistance.
E528EN_06 2011-04 Selecting a punch 13
Attaching the handle
deskPDF Studio Trial