Trumpf TruTool F 301, Руководство оператора

Страница: 17 / 20

E607EN_01.DOC
Maintenance
17
5.2 Supplying with power and
guaranteeing lubrication
Caution
Damage to property due to improper handling!
Failure of the compressed air motor.
¾ Do not exceed the maximum operating pressure.
¾ Regularly lubricate the compressed air motor. Install an oil
mist lubrication device into the compressed air line.
Condition
•
The pressure regulating valve and the connecting threads are
laid out correctly (see "Technical data", section 2.2, p. 7).
1 Connecting thread 1/4"
2 Oil mist lubrication device
3 Pressure regulating valve
4 Filter and water separator
5 Inside diameter of the
compressed air hose
min. 10 mm or 3/8"
Compressed air supply
1. Install the filter and water separator (4).
2. Drain/check the water separator daily.
Note
To ensure a supply of compressed air the tube cross-sections in
the entire line system must be twice to three times the size of the
inside diameter of the compressed air hose.
Supplying compressed air
Fig. 52385