Trumpf TruTool F 301, Руководство оператора

Страница: 12 / 20

12
Operation
E607EN_01.DOC
4. Operation
Warning
Risk of injury due to improper handling!
¾ Make sure the machine is always in a stable position when
operating it.
¾ Never touch the tool while the machine is running.
¾ Always move the machine during work away from your body.
¾ Do not operate the machine above your head.
4.1 Operating the TruTool F 301
1. Turn the safety lever (62).
2. Press the lever (61) against the motor housing.
In order to improve work results, lightly oil the rollers or the sheet
with universal oil (Order No. 0138648).
Depending on the construction type of the channel to be machined,
a distinction is made between two possible ways of commencing
work:
•
Channel open.
•
Flange at the beginning of the channel.
Bevel the web at the beginning of the channel approximately 30°
for a length of approximately 5 mm.
30°
B P
~ 5 mm
A
A Beveling for the placement of
the machine B Flange
P Tacking
point
Switch on
Operating the TruTool F 301
Channel open
Fig. 13411