Trumpf TruTool F 301, Руководство оператора

Страница: 11 / 20

E607EN_01.DOC
Setting work
11
3.2 Setting the tool
The clearance between the rollers and the guide rails can be
locked into place in two positions in order to be able to place the
machine at the desired position of the channel or to be able to
remove it from the machining position at the end of the channel:
•
Setting lever (1) in position against the direction of feed: "Tool
open".
•
Move setting lever (1) in direction of feed in end position: "Tool
in work position".
1 Setting lever
"Tool open"
1 Setting lever
"Tool in work position"
Note
No adjustment for material thickness is required because the
machine automatically adjusts itself to the material thickness.
"Tool open"
Fig. 18191
Tool in work position
Fig. 18192