Trumpf TruTool F 301, Руководство оператора

Страница: 10 / 20

10
Setting work
E607EN_01.DOC
3. Setting work
3.1 Installing the exhaust hose
The exhaust hose reduces noise emissions and guides the
exhaust air away from the operator.
1 Adapter
2 Teflon
tape
3 Sleeve
4
Compressed air hose
5 Hose clip
6 Exhaust hose
7 Spring ring
Exhaust hose
1. Put the exhaust hose (6) and the hose clip (5) over the
compressed air hose (4).
2. Undo the spring ring (7) and screw the adapter (1) onto the
motor.
3. Wind Teflon tape (2) around the sleeve (3).
4. Screw sleeve (3) tightly into the motor.
5. Push the compressed air hose (4) onto the sleeve (3).
6. Position the hose clip (5) and tighten.
7. Push the exhaust hose (6) on to the adapter (1).
8. Secure the exhaust hose (6) using the spring ring (7).
Fig. 52422