Trumpf TruTool C 250, Руководство оператора

Страница: 16 / 22

16
Operation
E621EN_01.DOC
4.1 Working with the TruTool C 250
Before using the cordless electric tool, a new exchangeable battery
or one that has not been used for a long time needs to be
activated.
¾ Place rechargeable battery briefly on the recharger or charge it
completely.
The LEDs on the rechargeable battery show the charging status.
Note
The performance capacity of the rechargeable battery is available
to only a limited extent at temperatures below -10°C.
The rechargeable battery shuts off automatically when it is
completely discharged. The rechargeable battery emits brief
electricity pulses when the electrical tool is switched on.
Note
Do not move the machine towards the workpiece until full speed
has been reached.
1
2
14°
1 Marking for cutting position 2 Chip separator
1. Slide the On/Off switch forwards.
2. Guide the machine at an angle of about 14° to the sheet
surface.
Activating rechargeable
battery
Discharging the rechargeable
battery
Switching on the
TruTool C 250
Fig. 37735