Trumpf TruTool C 250, Руководство оператора

Страница: 9 / 22

E621EN_01.DOC
Setting work
9
3. Setting work
3.1 Selection of tools
Note
The blades have 2 cutting edges. They cannot be resharpened.
Different types of blades are required, depending on the material
thickness or the tensile strength of the workpiece. (See Tab. 5,
p. 10.)
Note
If the blade is not selected as specified in the table,
–
The cutting quality will be severely impaired.
–
If the feed power increases significantly.
–
The blade will break.