Trumpf TruTool C 250, Руководство оператора

Страница: 18 / 22

18
Operation
E621EN_01.DOC
1
1 Chip
¾ Press the cut-off switch for approx. 0.5 s while the machine is
running. The cutting process is stopped automatically.
Note
Do not cut off small chips. The minimum length of a chip must be
at least one full turn.
Remove the chip manually.
Note
The front part of the casing has a marking that indicates the cutting
position.
¾ Slide the On/Off switch to the rear.
Cutting off chips
Fig. 37734
Switching off the
TruTool C 250