Trumpf TruBend 3000 Series, Руководство по модернизации

Страница: 9 / 18

1714400_ANGLE_MEAS
URING_SYSTEM_OCB
Installing the OCB transfer device 9
The serial number of the control's internal hard drive is displayed
on the screen. On the left side of the screen, a list of the possible
options for the control is shown. An already activated option is
displayed by the word “Registered“ in the right column. The
procedure for the requesting of an option depends on the selected
mode. The “Direct mode“ selection is only possible if the control
has Internet access. If this is not the case, select “File mode“.
Activated program
Fig. 49860
Fig. 49861