Trumpf N 700-2, Руководство оператора

Страница: 9 / 22

E528EN_03.DOC
Tool assembly
9
3.3 Checking penetration depth
of the punch
1
2
3
4
1 Eccentric shaft
2 Die carrier
3 Punch
4 Locking mechanism
E Penetration depth
Penetration depth of the punch
The penetration depth of the punch into the die should be 1 to 3 mm.
1. Rotate the eccentric shaft (1) until the punch (3) has reached
its maximum penetration depth.
2. Open locking mechanism (4).
3. Rotate the die carrier (2) by 360° as often as needed until the
punch penetration depth of 1-3 mm has been achieved. One
rotation (360°) corresponds to a height adjustment of 1.75 mm
4. Close locking mechanism (4).
Fig. 38378