Trumpf N 700-2, Руководство оператора

Страница: 14 / 22

14
Operation
E528EN_03.DOC
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine the material.
–
Machine the desired cutting line.
3. In the event that the cutting track ends in the sheet, pull the
machine (still running) a few millimeters back towards where
the cutting track has already been cut open.
4. Switch off machine.
Note
The cutting result is improved and the service life of the punch
increased if the cutting track is coated with oil before machining the
workpiece.
Material Oil
Steel Punching and nibbling oil, Material No. 103387
Aluminum Wisura oil, Material No. 125874
Recommendation for oil
¾ Press and release the On/Off switch (2).
4.2 Changing the cutting direction
In situations where space is limited, the tool can be mounted in
such a way as to have a different cutting direction.
•
Mount the tool at an angle turned 90° to the right or to the left
(cutting of profiles).
•
Mount the tool at a 180° rotation (nibbling to the rear).
1. Open locking mechanism (8).
2. Turn the die carrier (7) in the desired direction.
3. Close locking mechanism (8).
4. Check the depth of penetration of the punch.
Working with the N 700-2
Tab. 5
Switching off the N 700-2