Trumpf N 700-2, Руководство оператора

Страница: 13 / 22

E528EN_03.DOC
Operation
13
4. Operation
4.1 Working with the N 700-2
Caution
Damage to property due to high power supply voltage!
Motor damage
¾ Check the power supply voltage. The power supply voltage
must correspond to the information on the type plate of the
machine.
Warning
Danger of injury due to improper handling!
¾ Make sure the machine is in a stable position when operating it.
¾ Never touch the tool while the machine is running.
¾ Always operate the machine away from your body.
¾ Do not operate the machine above your head.
2
1
1 Release inhibiter knob 2 On/Off switch
1. Press the release inhibiter knob (1), keep holding it and press
the ON-OFF switch (2).
The motor will start to run.
2. Let go of the ON-OFF switch (2).
Note
Momentary operation is possible.
Press the release inhibiter knob (1). Keep holding it and press the
ON-OFF switch (2). Then let go of the release inhibiter knob.
Switching on the N 700-2
Fig. 38380
Continuous operation