Trumpf N 700-2, Руководство оператора

Страница: 15 / 22

E528EN_03.DOC
Operation
15
4.3 Nibbling with templates
The following requirements must be met when nibbling with
templates:
•
The template must be at least 5 mm thick.
•
The contour of the template must have a clearance of 11 mm
to the contour to be nibbled out.
•
Guide the nibbler in such a way that the exterior cut-out of the
punch guide (5) always remains up against the template.
•
Observe a minimum radius of 135 mm.
4.4 Making inner cutouts
Inner cutouts require a start hole of at least 60 mm in diameter.