Features
Do's and Don'ts
Installation Precaution
1. Always connect the "Earth" to the external "Earthing" screw
2. Tighten the cable entries & glands properly
3. Secure the top aluminium cover at its place properly once the
electrical connections and other settings are completed
4. Always tighten the process connection using proper wrench
never try to tight by rotating the aluminium housing
5. Make sure process connection is same as that in hopper/tank
6. Transmitter probe should never be:-
6.1 Bent
6.2 Held from thin part
6.3 Cut or machined in any way
6.4 Extended by welding or machining
7. Airvent hole should be clear from material and other
dust particles
8. Nozzles should never be longer than the inactive / ground length
9. Never climb either by gripping or stepping over either the
probe or its aluminium housing
10. Obeserve other safety precautions as required at the place
of application
3
2
4
5
1
6
7
tlc2-manual-page03
www.trumen.in
3