background image

5

Hitching to a tow car

It is totally possible to position the caravan’s hitch to a 
stationary car tow ball using the Mover, but take some care. 

Use the instructions above as your guide. Use the button con-
trols to bring the caravan to the car (car handbrake “ON“, and 
car in gear). Use a button stabbing technique to exactly posi-
tion the hitch directly over the ball. Lower the hitch to the ball 
and engage in the normal way using the jockey wheel. 

Prepare the caravan for towing as usual. 

The caravan must 

not be towed with the drive rollers swivelled in.

Maintenance

Please do not allow the drive units to become soiled with 
coarse road material. When you are cleaning the caravan, 
spray the Mover with a water hose to dissolve mud etc. Please 
ensure that no stones, twigs or the like become trapped in the 
equipment. The control unit does not require maintenance. 
Please keep the remote hand set in a dry place. 

Every year (and / or before putting away for the winter), clean 
Mover as described, dry and lightly spray the drive unit guides 
with oil spray or a similar water-repelling lubricant. 

Do not 

put lubricant on the rollers or the tyres! 

Swivel the drive 

units in and out several times to allow the lubricant to pen-
etrate all the guides. Do not park the caravan with the drive 
rollers swivelled in. 

To prevent the battery from becoming totally discharged 
during long periods of inactivity it must be disconnected 
or switched off using the isolating switch and occasionally 
 recharged. Charge the caravan battery before starting up.

It is extremely easy for you or your caravan dealer to perform 
the checking and maintenance of your Mover during the 
annual inspection of your caravan. If in doubt, please contact 
the  Truma Services (see Truma Service Booklet or 
www.truma.com). 

Checks

–  Check the installation, wiring and connections for damage 

at regular intervals. The drive units must be able to move 
freely and be returned automatically to the safe idle position 
by the return spring when they are swivelled out. If this is 
not the case, examine drive units for soiling or corrosion at 
the guides and clean if necessary. Undo all moving parts as 
required and oil or spray with a lubricant such as WD40 to 
ensure that the equipment moves correctly and provides the 
full range of movement. 

–  After the annual inspection, check whether all motors react 

properly to the buttons on the remote control.

Trouble-shooting

Before calling customer service, please check the following: 

Are the batteries in the remote handset in good condition? 

Is the caravan battery in good condition and fully charged? 
Please note that battery performance can deteriorate rapidly at 
cold ambient temperatures. 

Perform a reset by briefly disconnecting the battery (for 
 approx. 10 seconds) or move isolating switch to “OFF“ and 
then back to “ON“.

If the fault cannot be remedied, please contact your dealer or 
the Truma Service department (see Truma Service Booklet or 
www.truma.com). 

Synchronising the electronic control unit with 
the radio remote hand set

The remote hand set and the control unit are 
synchronised with each other in the factory.

If the control unit or the remote hand set is replaced, they 
must be re-synchronised as described below.

Check the installation in accordance with the installation in-
structions and ensure that the drive rollers are 

not

 applied. 

Check that the battery is properly connected, check the condi-
tion of the battery and that a voltage of 12 V is present at the 
control unit. 

Press the reset button (k) on the control unit and hold down 
(red LED – j – flashes slowly), and after approx. 5 seconds the 
LED (j) starts to flash rapidly. Then release the reset button 
and press and hold down the caravan reverse button on the 
remote hand set (c) within 10 seconds, simultaneously swit-
ching on the remote hand set using the slide switch (a).

a

c

j

k

The remote hand set and the control unit are synchronised to 
each other. After successful synchronisation, the red LED 
flashes rapidly.

Содержание Mover S

















Отзывы: