Truma Mover S Скачать руководство пользователя страница 3

3

Mover S

Safety-related instructions

–  Practice operating the Mover in an open area before using 

for the first time. 

This to fully familiarise yourself with 

the handset / mover operation. 

–  Always check tyres and drive rollers before using the 

equipment; remove sharp-edged stones and the like if 
necessary. 

–  No person must be present in the caravan during operation. 

– 

All persons (particularly children)

 must remain outside 

the Mover operating area. 

–  The distance between the radio remote hand set and the centre 

of the caravan when manoeuvring 

must not exceed 10 m!

–  In the event of malfunctions pull on the handbrake. 

–  To prevent the caravan from tipping, direct the tow hitch 

downhill when manoeuvering down a slope. 

– After 

manoeuvring, 

always 

apply the handbrake

 first, 

swivel the drive rollers away from the tyres

 and 

block 

the wheels

 (particularly on downwards-sloping surfaces). 

The Mover is 

not suitable for use as a parking brake

 

for a parked caravan. 

–  Ensure that remote radio control is protected from 

unauthorised access (particularly by children!). 

–  Never tow the caravan with the drive rollers applied. This 

can cause damage to the tyres, the towing vehicle and the 
drive units. 

–  All wheels and tyres on the caravan must be of the same 

size and design. 

–  In order to ensure that the Mover operates correctly, the 

distance between the tyres and the swivelled-out drive roll-
ers must be 20 mm. All tyres must have the same inflation 
pressure as per the manufacturer’s instructions (check at 
regular intervals!). If tyres are worn or new tyres are fitted, 
the distance between the drive rollers and the tyres may 
need readjusting (see “Installation of the drive units”). 

– Do 

not

 use the Mover as a support when jacking up the 

caravan, since this can damage the drive unit. 

–  Sensitive objects such as cameras, cassette players (Walk-

mans) etc. must not be kept in the stowage box near the 
control unit or the motor cable. They can be damaged by 
the electromagnetic fields. 

–  The empty weight of the vehicle increases by the weight of 

the Movers, which reduces the payload of the vehicle. 

General instructions

The Mover S has been designed to cope with inclines of up to 
approx. 25 % bearing a gross weight of 1200 kg or 15 % 
bearing a gross weight of 1800 kg on a suitable surface. 

Depending on the weight of the caravan, the Mover cannot 
overcome obstructions that are more than about 2 cm in 
height without assistance (please use wedges as a ramp). 

Due to the nature of a radio signal, it can get corrupted by ex-
ternal terrain or objects. So there may be small areas around 
the caravan where the quality of reception reduces, hence the 
Mover may stop momentarily. 

When the Mover is switched off using the remote control 
the control unit remains in standby. In order to switch off 

completely the battery must be disconnected or an isolating 
switch installed. 

Batteries 

We recommend the use of so-called drive and lighting batteries. 
Gel batteries and round cell batteries are also suitable. 

These batteries are designed for high power demands and 
have an extremely long service life. The maximum power 
consumption of the Mover on the steepest incline and carry-
ing the maximum weight is 120 A. The correct choice of bat-
tery depends on the usage period and the scope of use (other 
consumers in caravan). For mover operation we recommend 
batteries with a capacity of approx. 60 Ah or more. 

Example: 
A fully charged lead-acid battery with a capacity of 60 Ah al-
lows the Mover to be operated for approximately 30 minutes 
with a full load (depending on weight of caravan, battery type 
and terrain). On level terrain the Mover has average power 
consumption of approximately 20 A and therefore an operating 
time of approx. 3 hours. 

The use of gel batteries or round cell batteries means that 
smaller batteries can be used. 

Batteries with more capacity allow the equipment to be used 
for longer. 

We recommend the use of chargers with the IuoU character-
istic curve (e.g. Truma battery charger NT 12/ 3-18, part no. 
39901-01). These chargers prevent the battery from being 
damaged because of overcharging, for example. 

Because of the limited charging current, the charger 
cannot be used for rapid charging.

Function description 

Always observe the operating instructions and “Safety-
related instructions” prior to starting!

 The vehicle owner is 

responsible for correct operation of the appliance. 

Note that only single axle caravans are suitable. 

The Mover is a manoeuvring system with which a caravan can 
be moved without the assistance of a towing vehicle. 

It consists of two separate drive units, each of which has a 
12 Volt DC motor. These units are attached to the frame of the 
vehicle near the wheels and are connected by lateral bars. 

Once the drive rollers have been swivelled onto the tyres 
 using the provided lever, the Mover is ready for operation. All 
operation takes place using the remote hand set. This trans-
mits radio signals to the control unit. A separate 12 V lead-
acid battery or suitable lead-gel battery (not included in scope 
of delivery) supplies the control unit with current.

Содержание Mover S

















Отзывы: