Truma DIGITAL TIMER CONTROL Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 66

Truma DIGITAL TIMER CONTROL Скачать руководство пользователя страница 33

EQUIPMENT DET

AILS

111

WAECO FRIDGE

Operation with batteries
(internal power supply)

Indicator

Fault

Remedy

(3) and (8)

flashing brightly

Flame not ignited

Check gas supply (gas bottle, gas valve)
Press the

(8)

button after clearing the fault

(3) and (7)

flashing brightly

Burner defective
or cooling unit
defective

Check burner, burner nozzles, if necessary con-
tact Customer Service and arrange replacement

Acoustic signal at
15 second intervals

Undervoltage
detection (internal
batteries)

Replace batteries

Automatic switch-
ing from external
to internal power
supply does not
function (absence
of the onboard 12V
power supply for
the electronics)

Refrigerator does
not function, gas
operation not
possible although
the batteries are
inserted

Switch off the refrigerator and start again
The onboard power supply was interrupted during
the starting of the gas operation

Note:

No automatic switching is performed during

the ignition.

Waeco fridge

Before starting your new refrigerator for the first
time, you should clean it inside and outside with
a damp cloth for hygienic reasons (please also
refer to the see ‘Cleaning and care’).

8.1 Energy saving tips

• Allow hot food to cool down first before you

put it in the refrigerator.

• Do not open the refrigerator more often

than necessary.

• Do not leave the door open for longer

than necessary.

• Defrost your refrigerator as soon as a layer of

ice forms.

• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at

regular intervals.

8.2 Using the refrigerator

The fridge conserves fresh foodstuffs. The
freezer compartment conserves frozen
foodstuffs and freezes fresh foodstuffs.
Ensure that food or liquids in glass containers
are not excessively cooled. Liquids expand
when they freeze and can thus destroy the
glass containers.Food may only be stored in
its original packaging or in suitable containers.

«
...
31
32
33
34
35
...
»

Содержание DIGITAL TIMER CONTROL



































































Отзывы:

Нет отзывов