TruGolf TruFlight 2, Руководство пользователя

Страница: 11 / 13

18 19
FAQ &
TROUBLESHOOTING
WHAT IF THE SYSTEM ISN’T TRACKING MY CLUBHEAD SPEED
ACCURATELY?
T here are clubs that are difficult for the Club Head Camera to
properly track. This can be solved by placing one of the included
reflective stickers on the top far edge of the club head/face.
WHAT IF THE TRUFLIGHT 2 CONFIGURATION TOOL DOESN’T LAUNCH?
Check connections and the device manager to make sure that the
cameras have been installed properly.
WHAT IF CAMERAS DON’T INITIALIZE DURING TESTING?
Check connections and the device manager to make sure that the
cameras have been installed properly.
HOW TO ADJUST BALL SPEED
Ball speed is measured by taking the number of pixels that the
ball travels in an allotted time by the club head camera. Adjust
the “CTBallSpeedAdjust” number up or down from the default 1.0
value. 1.1 would be a 10% increase in ball speed, .9 would be a 10%
decrease.
WHAT IF I’M GETTING A ZERO-DEGREE LAUNCH ANGLE?
Repeat the step for Ball Camera Gain and Ball Camera Threshold
settings on both ball cameras.
WHAT IF CLUB HEAD SPEEDS ARE OFF (EXAMPLE BELOW)?
Repeat steps for Club Camera Gain .
ADJUSTMENTS SHOULD BE DONE IN THE CASE THAT THERE ARE
OBSTACLES ON THE FLOOR THAT WOULD INTERFERE WITH THE
CAMERA OR THE GOLFER’S CLUB STARTS ENTERING INTO THE
BALL CAMERA WINDOW.
• To adjust the spacing, start by clicking the Ball Camera Refresh button,
then Ball Camera Refresh button.
• There are two sliders below the image. Move the sliders to border
the area that the cameras should be looking at. The X Width number
should stay at 180.
• Click Ball Camera Refresh to view the new border lines.
• Click the other (right or left) camera button and enter in the same
settings for X Offset and X Width.
• Click Save Changes .