TruGolf TruFlight 2, Руководство пользователя

Страница: 10 / 13

16 17
CLUB HEAD AND BALL
TRACKING TESTING
THIS IS WHERE YOU MAKE SURE THE CAMERAS ARE TRACKING
CORRECTLY.
• The top two images (below) show the club head is tracking correctly;
the bottom two show the ball is tracking correctly.
CLUB HEAD
BALL
Note:
If the club head or ball is not tracking correctly, return to the
Greyscale section and repeat those steps.
IF EVERYTHING IS TRACKING CORRECTLY, IT’S TIME TO TEST IT
IN-GAME:
• Exit out of the TruFlight 2 Configuration tool.
• Launch E6 Connect and hit multiple shots with Wood, Iron, Wedge
and Putter.
• If there are any issues exit E6 Connect and enter back into the
configuration utility and hit the shots that are having issues.
• Make sure to watch the frames to ensure that the ball and club
are marked properly and the ball is showing up correctly in the
ball detection window.
BALL DETECTION TIMING
• Click Show Club Camera .
• Click Start .
• Hit test shot.
• Select
Show Ball Camera .
• To adjust where the ball appears in the frame adjust the Ball Trigger
Distance setting under Show Club Camera area.
• Sliding to a higher number captures the shot later (effectively
moving the ball to the left), sliding to the lower number captures
the shot earlier (moving the ball to the right).
• Adjust so that the ball appears in the middle of the frame, this will
require hitting several shots until you determine the best value.
• Click Save Changes .
TOO LATE
(reduce Ball Trigger Distance)
TOO EARLY
(increase Ball Trigger Distance)
Proper Ball Location in Window Ball Trigger Distance Setting
Correct Wood Shot Correct Iron Shot
Correct Wedge Shot Correct Putt