Truen TCAM-570-X18H, Руководство пользователя

Страница: 47 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
47/55
Swing

By using Swing function, you can make camera to move between 2 Preset positions repeatedly. When
swing function runs, camera moves from the preset assigned as the 1st point to the preset assigned as
the 2nd point in CW(Clockwise) direction. Then camera moves from the preset assigned as the 2nd
point to the preset assigned as the 1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd point,
camera turns on its axis by 360

in CW(Clockwise) direction and then it turns on its axis by 360

in
CCW(Counterclockwise) direction
.
1. Check Enable box
2. Select the Preset for 1st Position and 2nd Position
3. Enter the Speed (0~255)
4. Press Save Swing button to save the Swing
Group

This function is that the camera memorizes the combination of Presets, Pattern and/or Swings
sequentely and runs Presets, Pattern and/or Swings repetitively. MAX. 8 sets of Group are
programmable. Each group can have MAX. 20 actions which are the combinations of Preset, Pattern
and Swing. Preset speed can be set up and the repeat number of Pattern & Swing can be set up in
Option setup. Dwell time between actions can be set up as well.