Truen TCAM-570-X18H, Руководство пользователя

Страница: 15 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
15/55
Installation using Wall Mount Bracket
①
Make a hole whose diameter is 30~40mm on
the mounting surface to pass the wire(s) and
cable(s) through the mounting surface. (In case of
the wiring and cabling through the mounting surface
only) Then prepare the wall mount bracket. Pull the
wire(s) and cable(s) for the system as below. Attach
the wall mount bracket to the mounting surface.
(Hex Lag #14
×
50)
② Hook up “Drop Prevention Spring” on main body to
prevent camera from unexpected drop and pull the
wire(s) and cable(s) for the system as below.
③
Line up the mold lines and assemble main body to
mount adaptor and turn it. And assemble the main
both with the camera mount adaptor with the screws.
(Torx screw M4X18). Please make sure the screws
are tightly assembled for waterproof.
④
Screw the dome cover to the main body and
remove the protection vinyl from the dome
cover.
Notice

Before starting the installation, make sure that the Camera ID and Protocol are set up properly.