Truen TCAM-570-X18H, Руководство пользователя

Страница: 12 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
12/55
2. Installation
DIP Switch Setup
When you control the camera through RS-485, before installation, you should set the DIP switches to
configure the camera ID, communication protocol.
Camera ID setup
ON
ON
1 2 3 4 5 6 7 8

ID numbers of camera are set up with binary numbers..
See the examples shown below
Pin 1 2 3 4 5 6 7 8
ID Value 1 2 4 8 16 32 64 128
ex) ID=5 on off On off off off off off
ex) ID=10 off on Off on off off off off

The camera ID range is 1~255. Camera ID must not be 0 .

Factory default of Camera ID is 1.

Match the camera ID with Cam ID setting of your DVR or Controller
to control the camera.