Page 6 of 37
3.2 Internet connection setup
For first time setup
Connect to True-i gateway in access point (AP) mode.
(See 3.1
Access Point (AP) mode connection for details.)
Open “TrueEye SmartHome” mobile application. For first time set
up, the following page will appear automatically as shown in the
picture.
1)
Put prefer “Gateway Name”.
2)
Put the “Serial Number”.
3)
“Router SSID” should be user’s home Wi-Fi SSID.
4)
“Router Password” should be user’s home Wi-Fi password.
5)
Please click “OFF” button to switch “ON” for “Internet
Connection”. If the button is already “ON”, no further action
is required.
6)
Click “SAVE” for saving the settings to communicate with
user’s home Wi-Fi hotspot.
*Note that all input are case sensitive
Please take note that Wi-Fi should be 2.4 GHz frequency
band. (Not compatible with 5 GHz frequency band)
The device will ask the user to restart the gateway after
clicking “SAVE” button. Please restart the gateway for
changes to take effect of Wi-Fi configuration. Once it is
restarted, the gateway will be connected in “Internet
connection” mode.
Restarting the gateway can take about 5-10 minutes.
For subsequent setup (if user’s Wi-Fi information is changed)
For subsequent setup for changing user’s Wi-Fi information, the user
has to put the True-i gateway to be in Access Point (AP) mode first.
(See 3.1 Access Point (AP) mode connection for details.)
Then, the user can access the above mentioned setup information as
follows:
7)
Click “SETTING” on the mobile application
8)
Click “SETUP” as shown in the figure to change the setting
accordingly as shown in the “For first time setup” information
page.
Please follow the steps mentioned above and to change the
‘Router SSID’ name and ‘Router Password’, please change
accordingly as in step (3), (4) and (6).
