38
7
» Y081564 - (EN - REV. 003) | JUNE 2022
TAPPET AND BOOT ASSEMBLIES (13) AND INNER SEALS (22) REPLACEMENT
7.3.13 - Tool (
E
3
)
7.3.14 - Press-in the boot of the tappet using tool (
E
3
)
7.3.12
Release and remove tool (
E
2
)
7.3.13 To press in the boot of the tappet (13) tool (
E
3
) is
required (see Fig.).
7.3.14 Position tool (
E
3
) so that (T03) screws out against the
caliper as shown. Using a spanner, screw-out (T03) to press-in
the boot. Make sure that tool (
E
3
) is positioned square-on to
the caliper (see Fig.).
7.3.15 Release and remove tool (
E
3
), check that the
tappet (13) turns slightly in each direction (take care not to
overstretch the tappet boot) (see Fig.).
7.3.15 - Tappet should turn slightly in each direction
(E
3
)
- caliper removed from vehicle
T28
T55
13
T55
T28
T03
T02
T04
T04
T03
‘E
3
’
