51
9
» Pneumatic Disc Brake SL7 - SM7
CALIPER BEARINGS REPLACEMENT
9.3.4.1 - 9.3.4.2 - Place (6f) into the caliper bore and attach
tool combination (U
2
)
9.3.4.3 - Pull-in Guide sleeve (6f)
9.3.4
Fitting of Double Roll Bearing (6f)
9.3.4.1 Remove protective plug (see Fig. arrow
A
).
Making sure the protective sleeve is still fitted (see Fig. arrow
B
), place double roll bearing (6f) carefully into the caliper
bore.
9.3.4.2 Place tool (
U
2
) as shown through the double roll
bearing (6f) and hand tighten in place.
9.3.4.3 Using a torque wrench (
max. 23 Nm
) turn spindle
(TSY01) to pull-in double roll bearing (6f) (see Fig.).
If the torque value is
< 4 Nm
or.
> 23 Nm,
the caliper
must be replaced.
9.3.4.4 - Remove tools and protective sleeve
9.3.4.4 Romove tool combination (
U
2
) and protective sleeve
(see Fig. arrow
B
).
Despose of protective plug and sleeve in accordance
with enviromental guidelines.
A
B
TSY01
TSY01
TB17
TSY10
TSY06
TSY02
(U
2
)
B
