TRT TractionAir, Инструкция по установке и эксплуатации

Страница: 25 / 28

TractionAir
25
Outer Wheel Hose
Axle Bridge
TRT
Rotator
External
Wheel
Hose
Inner
Wheel
Hose
Tee Block
3/8 Nylon Tube
Tyre Plumbing and Puncture Repair
Isolate the TractionAir CTI system before changing tyres or removing wheels.
1. Turn off the isolating tap at the external feed hose supply tee block.
(one each side)
2. Turn off both wheel end ball valves as shown above.
3. Undo with a spanner the hex head wheel feed hose tail and remove from
the rotary coupling.
NB All fittings at the CTI axle bridge are SAE ball seat
type hex head.
4. Undo the tyre valve end of the
black wheel hose, to allow
removal of the wheel.
5. The wheel can now be
removed in the normal
manner.
(Taking care not
to damage the CTI axle bridge)
Reassembly
1. Make sure all the hoses are
reconnected before turning
the taps on.
2. The tyre valve hose tail is hand
tightened only. Take care not to
lose the internal rubber washer
(convex side to tyre valve stem)
3. Once everything is reconnected
and taps are turned on, check
for leaks.