TROY Group, Inc.
12
U
SING THE
W
EB
XA
DMIN
U
TILITY
(N
ON
-W
INDOWS OPERATING SYSTEMS
):
1. Ensure your PC is connected and has access to your network.
2. Connect an available Ethernet cable from your network hub to the
PocketPro USB print server. Ensure the print server is powered on.
3. With your printer and print server switched on and ready, press the
test
button on the print server to print a test page. The test page will
display the current IP address assigned to the print server by your
network DHCP service. If your network does not use DHCP, then
the print server will have the default IP address of 192.0.0.192. In
any case, your computer must use an IP address other than the one
used by the print server in order to establish a connection between
the two devices.
4. Configure the 802.11b wireless settings (only for the PocketPro USB
Wireless version). To operate on an 802.11b network, you must set
the wireless mode (ad-hoc or infrastructure), SSID channel, data rate,
and WEP encryption of the PocketPro USB Wireless print server to
the same configuration as the wireless network you want the print
server to communicate on. All nodes of a wireless network need to
have the same settings in order to communicate with each other.
5. From the host computer, open a standard web browser (e.g.,
Microsoft Internet Explorer or Netscape Navigator), enter the IP
address of the print server into the address bar of the web browser,
and then press
Enter
. The WebXAdmin Utility will be displayed,
allowing you to configure the settings of the print server. Refer to
the
PocketPro USB Administrator’s Guide
(provided in PDF format
on the
TROY PocketPro USB Installation
CD) for detailed
information on using the WebXAdmin Utility.
NOTE: Refer to the wireless security addendum (provided in print
with the PocketPro USB wireless print server and is also available
from the TROY web site at
http://www.troygroup.com
) for wireless
security configuration instructions.