Troy-Bilt Super Bronco 60TG, Руководство оператора

Страница: 12 / 48

12
Ammeter
The ammeter measures the electrical output of the
engine’s charging system. Under normal operating
conditions, with engine at full throttle, the ammeter
should indicate positive charge.
4
Operating
Your Lawn
Tractor
����
Figure 8
PTO (Blade Engage) Lever
The PTO (Blade Engage) lever is located on the left side
of the dashboard next to the steering wheel. Move the
PTO (Blade Engage) lever forward to engage the power to
the cutting deck or other (separately available) attach-
ments; move the PTO (Blade Engage) lever rearward to
disengage the power to the attachments.
NOTE
: The PTO (Blade Engage) lever
must
be in the
disengaged (OFF) position when starting the engine,
when traveling in reverse and if the operator leaves the
seat.
Seat Adjustment Knobs
To adjust the seat position, loosen the two seat adjust-
ment knobs and reposition the seat to the desired
position. Once a comfortable position is found, tighten the
adjustment knobs to lock the seat in place. Refer to Seat
Adjustment in the
Adjusting Your Tractor
section of this
manual for more detailed instructions.
Deck Lift Lever
Found on your tractor’s right fender, the deck lift lever is
used to change the height of the cutting deck. To use,
move the lever to the left, then place in the notch best
suited for your application.
Parking Brake Button
To set the parking brake, fully
depress the brake pedal and push
the parking brake button in. Hold
the button in while taking your foot
off the brake pedal. Both the park-
ing button and the brake pedal will
then stay depressed. To release
the parking brake, depress the
brake pedal slightly. The parking
brake button will then return to its
original position.
NOTE
: The parking brake must be set if the operator
leaves the seat with the engine running or the engine will
automatically shut off.
IMPORTANT
: Always set the parking brake when leaving
the tractor unattended.
������������������
ON
OFF
PTO
NOTE: The PTO (Blade
Engage) lever must be
in the disengaged (OFF)
position when starting
the engine, when
traveling in reverse and
if the operator leaves
the seat.