Troy-Bilt 208cc FLEX, Руководство оператора

Страница: 18 / 64

18 S
ection
5— o
peration
Propelling the Power Base Forward
To propel the power base forward, simply pull up on the Drive
Control Lever. To stop, simply release the lever.
Disconnecting an Attachment
Fully stop the power base engine before attempting to perform
any maintenance steps or uncoupling of the attachment.
WARNING!
Always turn off the FLEX™ Power Base
engine and remove the key prior to attempting to
uncouple of the power base from the attachment.
1. Fully stop the power base, and wait for all moving parts to
come to a complete stop.
2. Release the Attachment Control Lever.
WARNING!
Always be sure to release the
Attachment Control Lever before attempting to
couple or uncouple the power base from an
attachment. Failure to do so can result in damage to
your equipment.
3. With both hands on the handle grips, move the Latch’n
Lock™ kickstand into the unlock (Down) position, see
Figure 5-9.
Figure 5-9
4. Lift up on the handles, pivoting the power base forward
and move the power base backwards, away from the
attachment.
5. Park the power base utilizing the deployed Latch’n Lock™
kickstand, which should still be in the downward position.