Assembly & Set-Up
3
8
NOTE:
All references in this manual to the left or right side
of the FLEX™ Power Base is from the operating position only.
Exceptions, if any, will be specified.
IMPORTANT:
This unit is shipped
WITHOUT
the engine full of
oil.
FLEX™ Power Base Parking Position
To rest the FLEX™ Power Base after unpacking it from the
shipping carton, and/or when no attachment is present, a
convenient Latch’n Lock™ kickstand has been provided on the
rear of the unit. Simply deploy the Latch’n Lock™ kickstand to
park the FLEX™ Power Base when no attachment is present. See
Figure 3-1.
Figure 3-1
Installing and Adjusting the Handle
1.
Remove any packaging material from the upper handle.
2.
Loosen the star knobs (A) as shown in Figure 3-2, and pivot
the upper handle assembly upwards (B) until it reaches
the optimal operating position based on the operator’s
preference.
Note:
The handle adjustment range is not infinate, and
can only be adjusted within a range. Once reaching the
stop point in either the upward or downward position, it is
imporant not to attempt for force the handle any further.
A
A
B
Figure 3-2
3.
Tighten the two star knobs (C) to firmly secure the upper
handle and support tubes. See Figure 3-3.
C
C
Figure 3-3
Note:
The convenient star knobs, detailed in C of Figure 3-3, are
available for the operator to simply make a handle adjustment,
based on preference and/or application, quickly, and easily.
Содержание 208cc FLEX
Страница 29: ...Notes 10 29...
Страница 60: ...Notas 10 60...
Страница 61: ...61 Secci n 10 Notas...