background image

Customer Support

Please do 

NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of 

this machine, you can seek help from the experts. Choose from the options below:

Visit our web at www.troybilt.ca

◊ 

Locate your nearest dealer from Customer Support: 1-800-668-1238

◊ 

Contact Troy Bilt • P.O. Box 1386 • 97 Kent Avenue • Kitchener, Ontario, Canada • N2G 4J1

◊ 

To The Owner

1

2

Safe Operation Practices ........................................ 3

Assembly & Set-Up .................................................. 7

Controls ...................................................................12

Operation ................................................................14

Maintenance  & Adjustment..................................15

Service .....................................................................18

Troubleshooting .................................................... 22

Replacement Parts ................................................ 23

Warranty ................................................................ 24 

Table of Contents

Thank you for purchasing your new equipment.  It was carefully 

engineered to provide excellent performance when properly 

operated and maintained. 
Please read this entire manual prior to operating the equipment.  

It instructs you how to safely and easily set up, operate and 

maintain your machine.  Please be sure that you, and any other 

persons who will operate the machine, carefully follow the 

recommended safety practices at all times.  Failure to do so could 

result in personal injury or property damage. 
All information in this manual is relative to the most recent 

product information available at the time of printing.  Review 

this manual frequently to familiarize yourself with the machine, 

its features and operation.  Please be aware that this Operator’s 

Manual may cover a range of product specifications for 

various models. Characteristics and features discussed and/or 

illustrated in this manual may not be applicable to all models. 

The manufacturer reserves the right to change product 

specifications, designs and equipment without notice and 

without incurring obligation.
If you have any problems or questions concerning the machine, 

phone your local service  dealer or contact us directly.  Customer 

Support telephone numbers, website address and mailing 

address can be found on this page. We want to ensure your 

complete satisfaction at all times.
Throughout this manual, all references to 

right

 and 

left

 side of the 

machine  are observed from the operating position.
The engine manufacturer is responsible for all engine-related 

issues with regards to performance, power-rating, specifications, 

warranty and service. Please refer to the engine manufacturer’s 

Owner’s/Operator’s Manual, packed separately with your 

machine, for more information.

Thank You

Record Product Information

Before setting up and operating your new equipment, please 

locate the model plate on the equipment and record the 

information in the provided area to the right. You can locate the 

model plate by standing at the operator’s position and looking 

down at the rear of the frame. This information will be necessary, 

should you seek technical support via our web site, Customer 

Support Department, or with a local authorized service dealer.

M

odel

 N

uMber

S

erial

 N

uMber

Содержание 900 Series

























Отзывы: