Troxler 3430-M, Руководство по эксплуатации и инструкции, Страница: 65 / 142

Model 3430 5-3
To perform a stat test on the 3430 gauge, place the gauge on the
reference standard block in the standard count position (see
Chapter 3).
To access the Special functions, press
〈
SPECIAL
〉
.
To access the Stat Test feature, press the down arrow twice and
press
〈
START/ENTER
〉
.
To begin the twenty counts, press
〈
START/ENTER
〉
.
The gauge will display the stat test count progress as shown below.
Upon completion of the stat test, the gauge displays the pass/fail
status. If the stat test fails, repeat the test twice more. If two out of
three stat tests fail, contact Troxler. If the stat test passes, the display
is:
To view the stat test data, use the up and down arrow keys.
press START for
20 min Stat Test
– STAT TEST –
Rdg.#:xx xx sec
D: PASS M: PASS
↑ ↓
to view data
Dens. R = xxxx
↑ ↓
to view data
Dens. Avg. xxxx
↑ ↓
to view data
S
P
E
CI
AL
F
UNCT
IO
N
S