Troxler 3430-M, Руководство по эксплуатации и инструкции, Страница: 56 / 142

4-8
To recalibrate the gauge for the densities outside the factory
calibration range, press
〈
ON/YES
〉
. To disable the Special
Calibration feature, press
〈
OFF/NO
〉
at the above display and
〈
ON/YES
〉
at the disable inquiry. After disabling this feature, the
gauge will return to the Ready mode.
To enter a known B value obtained with the procedure available
from Troxler, press
〈
ON/YES
〉
. To have the gauge calculate the
recalibration, press
〈
OFF/NO
〉
. If entering a new known B value,
see the following explanation. For gauge-calculated special
calibration, see page 4-9.
ENTERING A NEW B VALUE
To change the value of the flashing digit for the measurement depth,
use the up and down arrows. To accept the flashing value and select
the next digit, press
〈
START/ENTER
〉
.
The gauge displays the current B value. To change the value of the
flashing digit, use the up and down arrows. To accept the flashing
digit and select the next digit, press
〈
START/ENTER
〉
.
SPECIAL CALIB.
Enter B Value?
Depth = xx in
(
↑ ↓
or ENTER)
B VAL = x.xxxx
(
↑ ↓
or ENTER)