manualshive.com logo in svg

Troxler 2701 -B, Руководство по эксплуатации и инструкции

Поделиться
Скачать
Troxler 2701 -B Скачать руководство пользователя страница 51

 

Model 2701-B 

4–5

 

4. 

USING THE GAU

G

E 

TAKING MEASUREMENTS 

 
The 

Status

 feature (see page 2–6) allows the operator to view the 

current gauge status. This feature provides a quick overview of the 
battery voltage, internal temperature, selected measurement units, 
and the date and time of the last reference reading. If necessary, 
check the gauge’s current status before taking measurements. 
 

NOTE 

To ensure the accuracy of gauge measurements, take a 
reference reading each day the gauge is to be used (see 
page 4–2) and periodically while taking measurements. 

 
As described on page 2–16, the PaveTracker Plus provides three 
measurement modes: 

continuous

, 

averaging

, and 

segregation

. 

Before taking a measurement, select the appropriate measurement 
mode. 
 

CAUTION 

High internal temperatures may damage the gauge’s 
electronic components. To reduce the risk of damage, 
DO NOT allow the gauge to sit on hot asphalt for 
extended periods. 
 
If the internal temperature of the gauge reaches a level 
that is considered excessive, the beeper will sound and 
the warning message 

Internal temp. high Allow 

gauge to cool

 will be displayed. The gauge should be 

taken to a shady or air-conditioned environment and 
allowed to cool before continuing. If measurements are 
performed before the gauge is allowed to cool, the 
warning symbol 

!

 is displayed. 

 

CAUTION 

The gauge includes a replaceable protective cover that 
protects the bottom surface of the gauge’s sensor 
assembly against wear and provides thermal protection 
for the gauge’s internal components. To prevent damage 
to the gauge, DO NOT operate the gauge without the 
protective cover. 

Содержание 2701 -B

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды