Trox BVD F600, Инструкция по установке и эксплуатации

Страница: 43 / 64

10 Decommissioning
Once the period of use of the device has expired, the
device must be removed and disposed of in an environ-
mentally friendly manner.
10.1 Safety
Personnel

Disassembly must only be carried out by specially
trained specialist personnel.

Work on the electrical system must only be carried
out by qualified electricians.
Electrical system
DANGER!
Danger of death due to electric current!
Danger of electric shock! Do not touch any live com-
ponents! Live electrical components may execute
uncontrolled movements and cause serious injury.
Therefore:
– Before starting disassembly work, switch off the
power supply and disconnect it permanently.
WARNING!
Risk of injury due to incorrect disassembly!
Stored residual energy, angular components, sharp
edges and corners on and in the unit or on the
required tools can cause injuries. Therefore:
Therefore:
– Before starting the work, ensure that there is
enough space.
– Handle open, sharp-edged components with
care.
– Disassemble components properly. Be aware
that some components are very heavy. Use
hoisting devices if necessary.
– Secure components so that they do not fall down
or topple over.
– Consult the manufacturer if anything is unclear.
10.2 Disassembly
Before starting disassembly:

Switch off the unit and secure it against being
switched back on again.

Physically disconnect the unit from the power supply
and discharge any residual energy.

Remove any operating materials, auxiliary materials
and residual processing materials, and dispose of
them in an environmentally-friendly manner.
Then professionally clean sub-assemblies and compo-
nents and dismantle them in accordance with local
occupational safety and environmental protection regu-
lations.
10.3 Disposal
If no return or disposal agreement is in place, any disas-
sembled components should be recycled:

Scrap the metals.

Take plastic parts to be recycled.

Dispose of other components in a suitable manner,
i.e. depending on their material properties.
ENVIRONMENT!
Environmental damage due to improper dis-
posal!
Electronic waste, electronic components, lubricating
and other auxiliary materials must be treated as haz-
ardous waste and must only be disposed of by
approved specialist companies!
The local municipal authority or specialist disposal com-
panies provide information about environmentally-
friendly disposal.
Decommissioning
Disposal
Centrifugal roof fans DRH; DRV; DRVF; DRVF-H; BVD; BVD(F600) 43