8
EN
dehumidifier TTK 900 MP
Relocating the transport handle
Depending on your requirements, the transport handle can be
installed horizontally or vertically. To adjust the position of the
transport handle, carry out the following steps on both sides of
the device:
1. Unscrew or loosen the screw (
14
).
2. Remove the screw (
13
).
13
14
15
3. Turn the transport handle by 90°.
13
14
4. Insert the screw (
13
) in the rivet (
15
).
5. Tighten the screws (
14
,
15
).
Inserting the air filter
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
•
Make sure that the air filter is installed before switching
the device on.
Содержание TTK 900 MP
Страница 1: ...TRT BA TTK900MP TC2021 11 001 EN TTK 900 MP EN ORIGINAL INSTRUCTIONS DEHUMIDIFIER...
Страница 10: ...10 EN dehumidifier TTK 900 MP 3 4 5 6 7 8...
Страница 17: ...EN 17 dehumidifier TTK 900 MP Wiring diagram TTK 900 MP With operating hours counter...
Страница 23: ...Trotec GmbH Grebbener Str 7 D 52525 Heinsberg 49 2452 962 400 49 2452 962 200 info trotec com www trotec com...
